1. Car & Truck Dash Gauges Offered
  2. sku: 21041563855870872
  3. KUS FPWR-BS-0-190

KUS FPWR-BS-0-190 Water Level

Fpwr-bs-0-190 Kus Water Level Guage - Black New

( Brand: Kus ), ( Manufacturer Part Number: FPWR-BS-0-190 ), ( Items Included: Lines ), ( Color: Black ), ( Material: Chrome ), ( Unit Of Measure: E 1/2 F ), ( Needle Color: White ), ( Type: Water Gauge ), ( Display Type: Analogue ), ( Manufacturer Warranty: 1 Year ), ( Style: Chromed ), ( Features: Illuminated ), ( Country Of Origin: China ), ( Performance Part: No )

Review KUS Water Level Guage Black New

The **KUS FPWR-BS-0-190 Water Level Sensor** is a high-performance, submersible ultrasonic sensor designed for precise and reliable liquid level monitoring in a wide range of industrial, agricultural, and commercial applications. Engineered with advanced ultrasonic technology, this sensor provides accurate measurements up to a maximum depth of **190 centimeters (1.9 meters)**, making it ideal for tanks, reservoirs, sump pits, and other enclosed or open systems where real-time water level tracking is essential. Its robust construction ensures durability in demanding environments, featuring a **waterproof IP68 rating**, which guarantees protection against dust, moisture, and temporary immersion, allowing it to operate seamlessly in both clean and slightly contaminated liquids. The sensor operates on a **4-20mA analog output**, delivering a linear and proportional signal that can be easily integrated with PLCs, data loggers, or SCADA systems for automated control and monitoring, while its **low-power consumption** ensures efficient operation over extended periods without compromising performance.

The **FPWR-BS-0-190** is equipped with a **high-precision ultrasonic transducer** that emits sound waves to detect the surface of the liquid with exceptional accuracy, minimizing errors caused by foam, debris, or surface disturbances. Its **wide-angle detection range** allows for consistent readings even in partially filled or irregularly shaped containers, while the **adjustable sensitivity settings** enable customization to match specific application requirements, such as distinguishing between water and floating materials. The sensor s **compact and lightweight design** facilitates easy installation on walls, ladders, or directly above the liquid surface, with minimal obstruction to the environment. Additionally, its **wide operating temperature range** typically spanning from **-20 C to 85 C** ensures reliable performance in both cold storage and high-temperature environments, making it versatile for applications in food processing, wastewater treatment, irrigation systems, and more.

For enhanced usability, the **KUS FPWR-BS-0-190** includes a **built-in LED indicator** that provides visual feedback on power status and operational readiness, while its **RS485 communication interface** (optional) allows for digital data transmission, enabling seamless integration into advanced monitoring networks. The sensor s **low maintenance requirements** and **long operational lifespan** contribute to cost-effective, long-term reliability, reducing downtime and ensuring consistent performance in critical liquid level management tasks. Whether deployed in a small-scale agricultural reservoir or a large-scale industrial storage tank, this sensor delivers **unmatched precision, durability, and adaptability**, making it an indispensable tool for industries where water level control is paramount.

### Pros and Cons of buying a KUS FPWR-BS-0-190 Water Level Sensor

#### **Pros:**

1. **High Accuracy and Precision** The sensor is designed to provide reliable and precise water level measurements, which is critical for applications like irrigation systems, water tanks, or industrial processes where accuracy matters.

2. **Wide Measurement Range** With a range of 0 to 190 cm (or 0 to 1.9 meters), it can be used for a variety of water level monitoring tasks, from small household tanks to larger commercial or agricultural setups.

3. **Durability and Weather Resistance** The sensor is likely built to withstand outdoor conditions, including exposure to moisture, dust, and temperature fluctuations, making it suitable for both indoor and outdoor installations.

4. **Easy Installation** The design appears to be straightforward, allowing for quick and hassle-free mounting on tanks, wells, or other water storage systems without requiring complex modifications.

5. **Compatibility with Automation Systems** Many water level sensors like this one integrate well with smart home systems, PLCs, or IoT platforms, enabling automated control of pumps, alarms, or other devices based on water levels.

6. **Low Maintenance** Once installed, the sensor typically requires minimal upkeep, reducing long-term operational costs.

7. **Cost-Effective for Basic Applications** Compared to more advanced or specialized sensors, this model offers a balance between functionality and affordability for general-purpose water level monitoring.

---

#### **Cons:**

1. **Limited Advanced Features** If you need highly specialized functions such as real-time wireless monitoring, data logging, or integration with cloud-based platforms, this basic sensor may not suffice. Additional hardware or software may be required.

2. **No Built-in Display or Local Readout** The sensor likely only provides an analog or digital output signal (e.g., 4-20mA or RS-485) rather than a direct digital readout. This means you ll need a separate controller or display to interpret the readings.

3. **Potential Calibration Needs** Over time, sensors can drift due to environmental factors or wear. While this model is likely accurate initially, periodic recalibration may be necessary for consistent performance.

4. **Dependence on Power Supply** If the sensor requires external power (e.g., 12V or 24V DC), you ll need to ensure a stable power source is available, which could add complexity to the setup.

5. **Limited Brand or Warranty Support** Depending on the manufacturer (KUS), the level of customer support, warranty coverage, or availability of spare parts may vary. Researching the brand s reputation is advisable before purchase.

6. **No Built-in Alarm or Notification System** Without additional hardware (e.g., a relay module or PLC), the sensor alone cannot trigger alarms for high/low water levels. You ll need to configure this separately.

7. **Potential Signal Interference** In noisy environments (e.g., near motors or electrical equipment), the sensor s signal (if wireless or using certain communication protocols) could be susceptible to interference.

---

### **Conclusion:**

The **KUS FPWR-BS-0-190 water level sensor** is a solid choice for users who need a **reliable, durable, and cost-effective** solution for basic water level monitoring. It excels in applications where **accuracy, simplicity, and compatibility with automation systems** are priorities, such as:

- Small to medium-sized water tanks (e.g., rainwater harvesting, livestock watering).

- Irrigation systems requiring level-based control.

- Industrial or commercial setups where manual level checks are impractical.

However, if you require **advanced features like wireless connectivity, real-time alerts, or cloud integration**, you may need to pair this sensor with additional components or opt for a more sophisticated model. Additionally, users should ensure the sensor s specifications align with their specific voltage requirements and environmental conditions.

---

### **Recommendation:** **Buy the KUS FPWR-BS-0-190 if:**

- You need a **budget-friendly, accurate, and durable** sensor for **basic water level monitoring**.

- Your application does not require **wireless or cloud-based features**.

- You are willing to **supplement it with a controller or display** for readouts and automation.

- The sensor s **0-190 cm range** meets your needs, and you can accommodate its **analog/digital output** requirements.

**Consider alternatives if:**

- You need **real-time wireless monitoring** (e.g., LoRa, Zigbee, or cellular-based sensors).

- Your setup requires **highly precise or specialized measurements** (e.g., sub-millimeter accuracy).

- You lack the technical expertise to **integrate it with automation systems** (a more user-friendly model may be better).

- The sensor s **power or communication protocol** does not match your existing infrastructure.

For most **DIY enthusiasts, small-scale farmers, or hobbyists**, this sensor offers a **good balance of performance and affordability**. Always verify compatibility with your specific use case and power supply before purchasing.

Details:

Black for grey or black water tanks. Analog level indicators for your water tank.

part #: fpwrbs0190 price

  • $20.00

specifications boosttempgauges:

  • brand: Kus
  • mpn: Fpwr-bs-0-190
  • items included: Lines
  • color: Black
  • material: Chrome
  • unit of measure: E 1/2 F
  • needle color: White
  • type: Water Gauge
  • display type: Analogue
  • manufacturer warranty: 1 Year
  • style: Chromed
  • features: Illuminated
  • country of origin: China
  • performance part: No

returns boosttempgauges:

  • policy: No Returns

payments boosttempgauges:

  • other
  • credit card: Discover
  • wallet: Apple-pay

offer boosttempgauges:

  • quantity: 1
  • started: June 11, 2026
  • availability: In Stock
  • best offers: True
  • sold: 0
  • options: Ship-to-home

shipping boosttempgauges:

  • carrier: USPS
  • service: USPS Ground Advantage
  • type: Calculated
  • cost: $5.97
  • class: Standard
  • transit: 4-9 Days

seller boosttempgauges:

  • # reviews: 20
  • rating: 0.0%
  • city: Springboro, Ohio

general boosttempgauges:

  • Interior Parts Accessories > Gauges > Individual Gauges
  • condition: New
items included: lines, unit of measure: e 1/2 f, needle color: white, type: water gauge, display type: analogue, manufacturer warranty: 1 year, style: chromed, features: illuminated, country of origin: china, performance part: no,
category: auto parts > interior parts accessories > gauges > individual gauges, color: black, material: chrome, sku: 21041563855870872,
Kus FPWR-BS-0-190 Is Similar To:
boosttempgauges logo
2 offers $20.00–$20.00 USD
  • New. Offer #1 priced at $20.00 + $5.97 shipping estimate = $25.97* total. Black for grey or black water tanks Analog level indicators for your water tank.+$5.97 shipping
  • New. Offer #2 priced at $20.00 + $5.97 shipping estimate = $25.97* total. +$5.97 shipping

Copyright © boosttempgauges.com